Mutual self-broken and friction between the material surface crushed sand maker machine is the use of high-speed movement of material, it is suitable for extra-hard the coarse crushing crushing operations in hard and abrasive materials. This machine is suitable iron ore, copper ore, gold and silver ore, molybdenum ore, lead-zinc ore, tungsten ore, manganese ore, glass raw materials, refractories, ceramics, building sand corundum, talc, olivine, rock salt, firefly hundreds of abrasive materials such as stone, limestone and silicon carbide slag crushing operations. This machine is an energy-saving, efficient crushing equipment.
Maximum particle size of the sand maker machine into material must be specified in the aircraft's technical performance parameters table granularity, non greater than the specified size of the material into the sand maker. The maximum moisture content of 20% or less of the broken material, Jingxi ore from the ore directly into the crusher. Sand maker discharge product size and ore material feed size, friable ore, the smaller the feed size, and its products have higher granularity qualified low and vice versa, changing the impeller speed, adjustable product particle size. When the sand maker discharge product particle size of not more than 10mm, the pass rate of 60% -90%, closed-circuit crushing is necessary in order to ensure the granularity of product qualification rate reached 100%, using the grading equipment. sand maker can also be used for coarse grinding job, when the crusher feed size 2-8mm particle size of the material up to 0.149-0.92.
Sand maker installed power configuration based on the physical properties of materials and production within the provisions of (the user can provide broken ore and feeding, discharging size by loading made ??factory optional configuration, according to user requirements).